Atomic Aquatics SV2 Semi-Dry Flex Snorkel

Using the Atomic Aquatics SV2 Semi-Dry Flex Snorkel during a dive can help you save precious air while hanging on the anchor line waiting to descend. There are numerous situations where a dependable, high-performance snorkel is a valuable dive tool. The new Atomic Aquatics SV Series truly redefines how a snorkel works and helps divers extend their adventure.

The SV2 includes a Scupper Valve lower section with a sleek semi-dry top. The SV2 semi-dry top employs horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top.

The small gaps between the vanes of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents without entering the breathing tube. The end result is less water in your snorkel. The SV2 is perfect for rough or choppy water conditions.

SV2 Flex: High-Performance Design with a Semi-Dry Top

The SV2 includes a Scupper Valve lower section with a sleek semi-dry top. The SV2 semi-dry top employs horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents without entering the breathing tube. The end result is less water in your snorkel. The SV2 is perfect for rough or choppy water conditions.

SV2 with Semi-Dry Top

Perfect for use in choppy waves
The SV2 combines the same Scupper Valve lower section with the sleek and effective SV2 Semi-Dry top. The SV2 Semi-Dry top horizontal vents (1) are engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes (2) of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents (3) without entering the breathing tube. Thus, you get less water in your snorkel. The SV2 is the perfect answer for rough or choppy water conditions.

SV Snorkel Series — How they work

Just like the one-way Scupper Valve on a boat, the lower section of both the SV1 and SV2 (semi-dry) enable water to be easily expelled. Any water entering the top of the snorkel (1) bypasses the mouthpiece completely and exits out the purge valve (4). If water did enter the internal tube (2)located inside the main snorkel body, it contains a small one-way Scupper flap valve (3) designed to allow water to flow past the mouthpiece and out the purge valve (4) without collecting at the bottom of the breathing passage. The diver simply exhales a small burst of air to clear any water trapped below the mouthpiece, and the internal tube airway is kept dry. It’s so simple and so effective we have a patent pending!

Atomic even designed a better snorkel keeper

Quick disconnect snorkel keeper includes 30-degree rotation.
The sliding snorkel keeper range adjuster allows for accurate placement without constant re-adjusting each dive.
Atomic Aquatics’ international and award-winning styling team makes the SV1 and SV2 high-performance snorkels something you would be proud to use.